adapt vim mode to work with ace

lib/ace/keyboard/emacs.js

@@ -38,8 +38,8 @@
 define(function(require, exports, module) {
 "use strict";
 
-var StateHandler = require("../state_handler").StateHandler;
+var StateHandler = require("./state_handler").StateHandler;
-var matchCharacterOnly =  require("../state_handler").matchCharacterOnly;
+var matchCharacterOnly =  require("./state_handler").matchCharacterOnly;
 
 var emacsState = {
     start: [

lib/ace/keyboard/vim.js

@@ -1,138 +1,27 @@
-/* ***** BEGIN LICENSE BLOCK *****
- * Version: MPL 1.1/GPL 2.0/LGPL 2.1
- *
- * The contents of this file are subject to the Mozilla Public License Version
- * 1.1 (the "License"); you may not use this file except in compliance with
- * the License. You may obtain a copy of the License at
- * http://www.mozilla.org/MPL/
- *
- * Software distributed under the License is distributed on an "AS IS" basis,
- * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
- * for the specific language governing rights and limitations under the
- * License.
- *
- * The Original Code is Mozilla Skywriter.
- *
- * The Initial Developer of the Original Code is
- * Mozilla.
- * Portions created by the Initial Developer are Copyright (C) 2009
- * the Initial Developer. All Rights Reserved.
- *
- * Contributor(s):
- *   Julian Viereck (julian.viereck@gmail.com)
- *
- * Alternatively, the contents of this file may be used under the terms of
- * either the GNU General Public License Version 2 or later (the "GPL"), or
- * the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
- * in which case the provisions of the GPL or the LGPL are applicable instead
- * of those above. If you wish to allow use of your version of this file only
- * under the terms of either the GPL or the LGPL, and not to allow others to
- * use your version of this file under the terms of the MPL, indicate your
- * decision by deleting the provisions above and replace them with the notice
- * and other provisions required by the GPL or the LGPL. If you do not delete
- * the provisions above, a recipient may use your version of this file under
- * the terms of any one of the MPL, the GPL or the LGPL.
- *
- * ***** END LICENSE BLOCK ***** */
-
 define(function(require, exports, module) {
 "use strict";
 
-var StateHandler = require("../state_handler").StateHandler;
+"never use strict";
-var matchCharacterOnly =  require("../state_handler").matchCharacterOnly;
 
-var vimcommand = function(key, exec, then) {
+var commands = require("./vim/commands");
-    return {
+var util = require("./vim/maps/util");
-        regex:  [ "([0-9]*)", key ],
-        exec:   exec,
-        params: [
-            {
-                name:     "times",
-                match:    1,
-                type:     "number",
-                defaultValue:     1
-            }
-        ],
-        then:   then
-    }
-}
 
-var vimStates = {
+exports.handler = require("./vim/keyboard").handler;
-    start: [
+
-        {
+exports.onCursorMove = function() {
-            key:    "i",
+    commands.onCursorMove();
-            then:   "insertMode"
+    onCursorMove.scheduled = false;
-        },
-        {
-            key:    "d",
-            then:   "deleteMode"
-        },
-        {
-            key:    "a",
-            exec:   "gotoright",
-            then:   "insertMode"
-        },
-        {
-            key:    "shift-i",
-            exec:   "gotolinestart",
-            then:   "insertMode"
-        },
-        {
-            key:    "shift-a",
-            exec:   "gotolineend",
-            then:   "insertMode"
-        },
-        {
-            key:    "shift-c",
-            exec:   "removetolineend",
-            then:   "insertMode"
-        },
-        {
-            key:    "shift-r",
-            exec:   "overwrite",
-            then:   "replaceMode"
-        },
-        vimcommand("(k|up)", "golineup"),
-        vimcommand("(j|down)", "golinedown"),
-        vimcommand("(l|right)", "gotoright"),
-        vimcommand("(h|left)", "gotoleft"),
-        {
-            key:    "shift-g",
-            exec:   "gotoend"
-        },
-        vimcommand("b", "gotowordleft"),
-        vimcommand("e", "gotowordright"),
-        vimcommand("x", "del"),
-        vimcommand("shift-x", "backspace"),
-        vimcommand("shift-d", "removetolineend"),
-        vimcommand("u", "undo"), // [count] on this may/may not work, depending on browser implementation...
-        {
-            comment:    "Catch some keyboard input to stop it here",
-            match:      matchCharacterOnly
-        }
-    ],
-    insertMode: [
-        {
-            key:      "esc",
-            then:     "start"
-        }
-    ],
-    replaceMode: [
-        {
-            key:      "esc",
-            exec:     "overwrite",
-            then:     "start"
-        }
-    ],
-    deleteMode: [
-        {
-            key:      "d",
-            exec:     "removeline",
-            then:     "start"
-        }
-    ]
 };
 
-exports.handler = new StateHandler(vimStates);
+exports.attach = function(editor){
+    editor.on("click", exports.onCursorMove);
+    if (util.currentMode !== "insert")
+        commands.coreCommands.stop.exec(editor);
+};
+
+exports.detach = function(editor){
+    editor.removeListener("click", exports.onCursorMove);
+    commands.coreCommands.start.exec(editor);
+};
 
 });

lib/ace/keyboard/vim/commands.js

@@ -8,14 +8,13 @@
 
 define(function(require, exports, module) {
 
-"use strict";
+"never use strict";
 
-var Editors = require("ext/editors/editors");
+var util = require("./maps/util");
-var util = require("ext/vim/maps/util");
+var motions = require("./maps/motions");
-var motions = require("ext/vim/maps/motions");
+var operators = require("./maps/operators");
-var operators = require("ext/vim/maps/operators");
+var alias = require("./maps/aliases");
-var alias = require("ext/vim/maps/aliases");
+var registers = require("./registers");
-var registers = require("ext/vim/registers");
 
 var NUMBER   = 1;
 var OPERATOR = 2;
@@ -390,7 +389,7 @@ var inputBuffer = exports.inputBuffer = {
             a.fn(editor, editor.getSelectionRange(), a.count, param);
             this.reset();
         }
-        handleCursorMove();
+        handleCursorMove(editor);
     },
 
     isAccepting: function(type) {
@@ -411,7 +410,7 @@ function setPreviousCommand(fn) {
     inputBuffer.previous = { action: { action: { fn: fn } } };
 }
 
-exports.commands = {
+exports.coreCommands = {
     start: {
         exec: function start(editor) {
             util.insertMode(editor);
@@ -451,12 +450,13 @@ exports.commands = {
             util.insertMode(editor);
             setPreviousCommand(appendEnd);
         }
+    },
+    builder: {
+        exec: function builder(editor) {}
     }
 };
 
-var handleCursorMove = exports.onCursorMove = function() {
+var handleCursorMove = exports.onCursorMove = function(editor) {
-    var editor = Editors.currentEditor.amlEditor.$editor;
-
     if(util.currentMode === 'insert' || handleCursorMove.running)
         return;
     else if(!editor.selection.isEmpty()) {

lib/ace/keyboard/vim/keyboard.js

@@ -1,11 +1,11 @@
 
 define(function(require, exports, module) {
 
-"use strict";
+"never use strict";
 
 var StateHandler = require("ace/keyboard/state_handler").StateHandler;
-var cmds = require("ext/vim/commands");
+var cmds = require("./commands");
-var editors = require("ext/editors/editors");
+var coreCommands = cmds.coreCommands;
 
 var matchChar = function(buffer, hashId, key, symbolicName, keyId) {
     // If no command keys are pressed, then catch the input.
@@ -20,13 +20,9 @@ var matchChar = function(buffer, hashId, key, symbolicName, keyId) {
             keyId = String.fromCharCode(parseInt(keyId.replace("U+", "0x"), 10));
         }
 
-        var editor = editors.currentEditor.amlEditor.$editor;
+        coreCommands.builder.exec = function(editor) {
-        editor.commands.addCommand({
+            cmds.inputBuffer.push.call(cmds.inputBuffer, editor, symbolicName, keyId);
-            name: "builder",
+        }
-            exec: function(editor) {
-                cmds.inputBuffer.push.call(cmds.inputBuffer, editor, symbolicName, keyId);
-            }
-        });
     }
     return matched;
 };
@@ -42,43 +38,43 @@ var states = exports.states = {
     start: [ // normal mode
         {
             key: "esc",
-            exec: "stop",
+            exec: coreCommands.stop,
             then: "start"
         },
         {
             regex: "^i$",
             match: inIdleState,
-            exec: "start",
+            exec: coreCommands.start,
             then: "insertMode"
         },
         {
             regex: "^shift-i$",
             match: inIdleState,
-            exec: "startBeginning",
+            exec: coreCommands.startBeginning,
             then: "insertMode"
         },
         {
             regex: "^a$",
             match: inIdleState,
-            exec: "append",
+            exec: coreCommands.append,
             then: "insertMode"
         },
         {
             regex: "^shift-a$",
             match: inIdleState,
-            exec: "appendEnd",
+            exec: coreCommands.appendEnd,
             then: "insertMode"
         },
         {
             // The rest of input will be processed here
             match: matchChar,
-            exec: "builder"
+            exec: coreCommands.builder
         }
     ],
     insertMode: [
         {
             key: "esc",
-            exec: "stop",
+            exec: coreCommands.stop,
             then: "start"
         },
         {
@@ -89,4 +85,4 @@ var states = exports.states = {
 };
 
 exports.handler = new StateHandler(states);
-});
+});

lib/ace/keyboard/vim/maps/aliases.js

@@ -1,4 +1,4 @@
-"use strict"
+"never use strict"
 
 define(function(require, exports, module) {
 module.exports = {

lib/ace/keyboard/vim/maps/motions.js

@@ -1,8 +1,8 @@
-"use strict"
+"never use strict"
 
 define(function(require, exports, module) {
 
-var util = require("ext/vim/maps/util");
+var util = require("./util");
 
 var keepScrollPosition = function(editor, fn) {
     var scrollTopRow = editor.renderer.getScrollTopRow();

lib/ace/keyboard/vim/maps/operators.js

@@ -1,9 +1,9 @@
 define(function(require, exports, module) {
 
-"use strict";
+"never use strict";
 
-var util = require("ext/vim/maps/util");
+var util = require("./util");
-var registers = require("ext/vim/registers");
+var registers = require("../registers");
 
 module.exports = {
     "d": {

lib/ace/keyboard/vim/maps/util.js

@@ -1,7 +1,5 @@
-"use strict";
-
 define(function(require, exports, module) {
-var registers = require("ext/vim/registers");
+var registers = require("../registers");
 
 module.exports = {
     onVisualMode: false,

lib/ace/keyboard/vim/registers.js

@@ -1,7 +1,7 @@
 
 define(function(require, exports, module) {
 
-"use strict";
+"never use strict";
 
 module.exports = {
     _default: {