Major cleanup

git-svn-id: https://swig.svn.sourceforge.net/svnroot/swig/trunk/SWIG@4155 626c5289-ae23-0410-ae9c-e8d60b6d4f22

Source/DOH/Doh/.cvsignore

@@ -1,3 +0,0 @@
-Makefile
-*.flc
-.deps

Source/DOH/Doh/Makefile.in

@@ -1,54 +0,0 @@
-#######################################################################
-# $Header$
-# DOH
-#######################################################################
-
-srcdir = @srcdir@
-VPATH  = @srcdir@
-
-#.KEEP_STATE:
-
-# Set your C++ compiler here.   g++ works on most machines,
-# but you might have to change it depending on your installation.
-#
-CC      = @CC@
-prefix     = @prefix@
-
-# Comment out the following line if you're on an SGI or don't have ranlib!
-RANLIB  = @RANLIB@
-AR      = @AR@
-
-DOHOPT  =
-
-########################################################################
-# Normally, you shouldn't have to change anything below this point     #
-########################################################################
-
-LIBOBJS = void.@OBJEXT@ fio.@OBJEXT@ memory.@OBJEXT@ base.@OBJEXT@ file.@OBJEXT@ list.@OBJEXT@ hash.@OBJEXT@ string.@OBJEXT@
-
-LIBSRCS = void.c fio.c memory.c base.c file.c list.c hash.c string.c
-
-LIBHEADERS = $(srcdir)/../Include/doh.h
-LIB      = libdoh.a
-INCLUDES = -I$(srcdir)/../Include
-CFLAGS   = @CFLAGS@
-SHELL  = /bin/sh
-
-#
-# Rules for creation of a .@OBJEXT@ file from .c
-.SUFFIXES: .c
-.c.@OBJEXT@:
-	$(CC) $(DOHOPT) $(INCLUDES) $(CFLAGS) -c -o $*.@OBJEXT@ $<
-
-all: $(LIB)
-
-$(LIB): $(LIBOBJS)
-	@echo "Building library"
-	$(AR) cr $(LIB) $(LIBOBJS)
-	$(RANLIB) $(LIB)
-	cp -f $(LIB) ..
-
-clean::
-	rm -f *.@OBJEXT@ $(LIB) ../$(LIB)
-nuke::
-	rm -f Makefile *~

Source/DOH/Makefile.in

@@ -1,29 +1,56 @@
-##############################################################
+#######################################################################
-# Makefile
+# $Header$
-#
 # DOH
-##############################################################
+#######################################################################
 
+srcdir = @srcdir@
+VPATH  = @srcdir@
+
+#.KEEP_STATE:
+
+# Set your C++ compiler here.   g++ works on most machines,
+# but you might have to change it depending on your installation.
+#
+CC      = @CC@
 prefix     = @prefix@
-exec_prefix= @exec_prefix@
 
-INCLUDE_DIR = $(prefix)/include
+# Comment out the following line if you're on an SGI or don't have ranlib!
-LIB_DIR = $(exec_prefix)/lib
+RANLIB  = @RANLIB@
+AR      = @AR@
 
-# Installer
+DOHOPT  =
 
-INSTALL        = ./install-sh -c
+########################################################################
-INSTALL_DATA   = ${INSTALL} -m 644
+# Normally, you shouldn't have to change anything below this point     #
-INSTALL_PROGRAM= ${INSTALL} -m 755
+########################################################################
+
+LIBOBJS = void.@OBJEXT@ fio.@OBJEXT@ memory.@OBJEXT@ base.@OBJEXT@ file.@OBJEXT@ list.@OBJEXT@ hash.@OBJEXT@ string.@OBJEXT@
+
+LIBSRCS = void.c fio.c memory.c base.c file.c list.c hash.c string.c
+
+LIBHEADERS = $(srcdir)/Include/doh.h
+LIB      = libdoh.a
+INCLUDES = -I$(srcdir)/Include
+CFLAGS   = @CFLAGS@
+SHELL  = /bin/sh
+
+#
+# Rules for creation of a .@OBJEXT@ file from .c
+.SUFFIXES: .c
+.c.@OBJEXT@:
+	$(CC) $(DOHOPT) $(INCLUDES) $(CFLAGS) -c -o $*.@OBJEXT@ $<
+
+all: $(LIB)
+
+$(LIB): $(LIBOBJS)
+	@echo "Building library"
+	$(AR) cr $(LIB) $(LIBOBJS)
+	$(RANLIB) $(LIB)
+
+clean::
+	rm -f *.@OBJEXT@ $(LIB) ../$(LIB)
+nuke::
+	rm -f Makefile *~
 
-all:
-	cd Doh; $(MAKE)
 
-install:
-	@echo "Installing $(LIB_DIR)/libdoh.a..."
-	@$(INSTALL_DATA) libdoh.a $(LIB_DIR)/libdoh.a
-	@echo "Installing $(INCLUDE_DIR)/doh.h..."
-	@$(INSTALL_DATA) $(srcdir)/Include/doh.h $(INCLUDE_DIR)/doh.h
 
-clean:
-	cd Doh; $(MAKE) clean

Source/DOH/install-sh

@@ -1,119 +0,0 @@
-#!/bin/sh
-
-#
-# install - install a program, script, or datafile
-# This comes from X11R5; it is not part of GNU.
-#
-# $XConsortium: install.sh,v 1.2 89/12/18 14:47:22 jim Exp $
-#
-# This script is compatible with the BSD install script, but was written
-# from scratch.
-#
-
-
-# set DOITPROG to echo to test this script
-
-# Don't use :- since 4.3BSD and earlier shells don't like it.
-doit="${DOITPROG-}"
-
-
-# put in absolute paths if you don't have them in your path; or use env. vars.
-
-mvprog="${MVPROG-mv}"
-cpprog="${CPPROG-cp}"
-chmodprog="${CHMODPROG-chmod}"
-chownprog="${CHOWNPROG-chown}"
-chgrpprog="${CHGRPPROG-chgrp}"
-stripprog="${STRIPPROG-strip}"
-rmprog="${RMPROG-rm}"
-
-instcmd="$mvprog"
-chmodcmd=""
-chowncmd=""
-chgrpcmd=""
-stripcmd=""
-rmcmd="$rmprog -f"
-mvcmd="$mvprog"
-src=""
-dst=""
-
-while [ x"$1" != x ]; do
-    case $1 in
-	-c) instcmd="$cpprog"
-	    shift
-	    continue;;
-
-	-m) chmodcmd="$chmodprog $2"
-	    shift
-	    shift
-	    continue;;
-
-	-o) chowncmd="$chownprog $2"
-	    shift
-	    shift
-	    continue;;
-
-	-g) chgrpcmd="$chgrpprog $2"
-	    shift
-	    shift
-	    continue;;
-
-	-s) stripcmd="$stripprog"
-	    shift
-	    continue;;
-
-	*)  if [ x"$src" = x ]
-	    then
-		src=$1
-	    else
-		dst=$1
-	    fi
-	    shift
-	    continue;;
-    esac
-done
-
-if [ x"$src" = x ]
-then
-	echo "install:  no input file specified"
-	exit 1
-fi
-
-if [ x"$dst" = x ]
-then
-	echo "install:  no destination specified"
-	exit 1
-fi
-
-
-# If destination is a directory, append the input filename; if your system
-# does not like double slashes in filenames, you may need to add some logic
-
-if [ -d $dst ]
-then
-	dst="$dst"/`basename $src`
-fi
-
-# Make a temp file name in the proper directory.
-
-dstdir=`dirname $dst`
-dsttmp=$dstdir/#inst.$$#
-
-# Move or copy the file name to the temp name
-
-$doit $instcmd $src $dsttmp
-
-# and set any options; do chmod last to preserve setuid bits
-
-if [ x"$chowncmd" != x ]; then $doit $chowncmd $dsttmp; fi
-if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dsttmp; fi
-if [ x"$stripcmd" != x ]; then $doit $stripcmd $dsttmp; fi
-if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dsttmp; fi
-
-# Now rename the file to the real destination.
-
-$doit $rmcmd $dst
-$doit $mvcmd $dsttmp $dst
-
-
-exit 0