Add Windows XInput feasibility test

Merge branch 'master' into feasibility/adapter-parity
Enable strong rumble for 8BitDo Switch mode
2026-09-02 09:08:49 -06:00 · 2026-09-02 08:57:52 -06:00 · 2026-09-02 08:50:26 -06:00
6 changed files with 572 additions and 7 deletions
--- a/controller_hotkey_config.h
+++ b/controller_hotkey_config.h
@ -19,8 +19,8 @@

 // Local confirmation pulse sent only to the controller that toggled.
 #define SWITCH_ABXY_FEEDBACK_DURATION_MS 120
-#define SWITCH_ABXY_FEEDBACK_WEAK_MAGNITUDE 0x80
-#define SWITCH_ABXY_FEEDBACK_STRONG_MAGNITUDE 0x80
+#define SWITCH_ABXY_FEEDBACK_WEAK_MAGNITUDE 0xFF
+#define SWITCH_ABXY_FEEDBACK_STRONG_MAGNITUDE 0xFF

 // A longer pulse confirms disabled; a shorter pulse confirms enabled.
 #define SWITCH_MOTION_DISABLED_FEEDBACK_DURATION_MS 180
--- a/firmware/switch-pico-aio.elf
+++ b/firmware/switch-pico-aio.elf
--- a/firmware/switch-pico-aio.uf2
+++ b/firmware/switch-pico-aio.uf2
--- a/patches/bluepad32-sdl3-imu.patch
+++ b/patches/bluepad32-sdl3-imu.patch
@ -259,10 +259,10 @@ index 0265f93..5c0f2bb 100644
     return (psmove_instance_t*)&d->parser_data[0];
 }
 diff --git a/src/components/bluepad32/parser/uni_hid_parser_switch.c b/src/components/bluepad32/parser/uni_hid_parser_switch.c
-index 599fc35..c72f056 100644
+index 599fc35..9f073b4 100644
 --- a/src/components/bluepad32/parser/uni_hid_parser_switch.c
 +++ b/src/components/bluepad32/parser/uni_hid_parser_switch.c
-@@ -51,7 +51,8 @@ static const int16_t DEFAULT_ACCEL_OFFSET = 0;
+@@ -51,13 +51,15 @@ static const int16_t DEFAULT_ACCEL_OFFSET = 0;
 static const int16_t DEFAULT_ACCEL_SCALE = 16384;
 static const int16_t DEFAULT_GYRO_OFFSET = 0;
 static const int16_t DEFAULT_GYRO_SCALE = 13371;
@ -272,7 +272,97 @@ index 599fc35..c72f056 100644
 
 #define SWITCH_FACTORY_IMU_CAL_DATA_SIZE 24
 static const uint16_t SWITCH_FACTORY_IMU_CAL_DATA_ADDR = 0x6020;
-@@ -823,19 +824,26 @@ static void parse_imu(uni_hid_device_t* d, const struct switch_imu_data_s* r) {
+ 
+ #define SWITCH_DUMP_ROM_DATA_SIZE 24  // Max size is 24
+ #define SWITCH_SETUP_TIMEOUT_MS 800
+#define SWITCH_RUMBLE_REFRESH_MS 40
+ #if ENABLE_SPI_FLASH_DUMP
+ static const uint32_t SWITCH_DUMP_ROM_DATA_ADDR_START = 0x20000;
+ static const uint32_t SWITCH_DUMP_ROM_DATA_ADDR_END = 0x30000;
+@@ -72,6 +74,7 @@ enum switch_state {
+     STATE_READ_FACTORY_IMU_CALIBRATION,    // Factory IMU calibration info
+     STATE_SET_FULL_REPORT,                 // Request report 0x30
+     STATE_ENABLE_IMU,                      // Enable/Disable gyro/accel
+    STATE_ENABLE_RUMBLE,                   // Enable controller vibration
+     STATE_DUMP_FLASH,                      // Dump SPI Flash memory
+     STATE_UPDATE_LED,                      // Update LEDs
+     STATE_READY,                           // Gamepad setup ready!
+@@ -111,6 +114,7 @@ enum switch_subcmd {
+     SUBCMD_SPI_FLASH_READ = 0x10,
+     SUBCMD_SET_PLAYER_LEDS = 0x30,
+     SUBCMD_ENABLE_IMU = 0x40,
+    SUBCMD_ENABLE_RUMBLE = 0x48,
+ };
+ 
+ typedef enum {
+@@ -137,6 +141,7 @@ typedef struct switch_instance_s {
+     // Although technically, we can use one timer for delay and duration, easier to debug/maintain if we have two.
+     btstack_timer_source_t rumble_timer_duration;
+     btstack_timer_source_t rumble_timer_delayed_start;
+    btstack_timer_source_t rumble_timer_refresh;
+     switch_state_rumble_t rumble_state;
+ 
+     btstack_timer_source_t setup_timer;
+@@ -322,6 +327,7 @@ static void fsm_read_user_stick_calibration(struct uni_hid_device_s* d);
+ static void fsm_read_factory_imu_calibration(struct uni_hid_device_s* d);
+ static void fsm_set_full_report(struct uni_hid_device_s* d);
+ static void fsm_enable_imu(struct uni_hid_device_s* d);
+static void fsm_enable_rumble(struct uni_hid_device_s* d);
+ static void fsm_update_led(struct uni_hid_device_s* d);
+ static void fsm_ready(struct uni_hid_device_s* d);
+ static void process_reply_read_spi_dump(struct uni_hid_device_s* d, const uint8_t* data, int len);
+@@ -333,11 +339,16 @@ static void process_reply_set_report_mode(struct uni_hid_device_s* d, const stru
+ static void process_reply_spi_flash_read(struct uni_hid_device_s* d, const struct switch_report_21_s* r, int len);
+ static void process_reply_set_player_leds(struct uni_hid_device_s* d, const struct switch_report_21_s* r, int len);
+ static void process_reply_enable_imu(struct uni_hid_device_s* d, const struct switch_report_21_s* r, int len);
+static void process_reply_enable_rumble(struct uni_hid_device_s* d, const struct switch_report_21_s* r, int len);
+ static int32_t calibrate_axis(int32_t v, switch_cal_stick_t cal);
+ static void set_led(uni_hid_device_t* d, uint8_t leds);
+ static void on_switch_set_rumble_on(btstack_timer_source_t* ts);
+ static void on_switch_set_rumble_off(btstack_timer_source_t* ts);
+static void on_switch_refresh_rumble(btstack_timer_source_t* ts);
+ static void switch_stop_rumble_now(uni_hid_device_t* d);
+static void switch_send_dual_rumble_now(uni_hid_device_t* d,
+                                        uint8_t weak_magnitude,
+                                        uint8_t strong_magnitude);
+ static void switch_play_dual_rumble_now(uni_hid_device_t* d,
+                                         uint16_t duration_ms,
+                                         uint8_t weak_magnitude,
+@@ -451,6 +462,10 @@ static void process_fsm(struct uni_hid_device_s* d) {
+             break;
+         case STATE_ENABLE_IMU:
+             logd("STATE_ENABLE_IMU\n");
+            fsm_enable_rumble(d);
+            break;
+        case STATE_ENABLE_RUMBLE:
+            logd("STATE_ENABLE_RUMBLE\n");
+             fsm_dump_rom(d);
+             break;
+         case STATE_DUMP_FLASH:
+@@ -725,6 +740,12 @@ static void process_reply_enable_imu(struct uni_hid_device_s* d, const struct sw
+     ARG_UNUSED(r);
+     ARG_UNUSED(len);
+ }
+static void process_reply_enable_rumble(struct uni_hid_device_s* d, const struct switch_report_21_s* r, int len) {
+    ARG_UNUSED(d);
+    ARG_UNUSED(r);
+    ARG_UNUSED(len);
+}
+
+ 
+ // Process 0x21 input report: SWITCH_INPUT_SUBCMD_REPLY
+ static void process_input_subcmd_reply(struct uni_hid_device_s* d, const uint8_t* report, int len) {
+@@ -752,6 +773,9 @@ static void process_input_subcmd_reply(struct uni_hid_device_s* d, const uint8_t
+         case SUBCMD_ENABLE_IMU:
+             process_reply_enable_imu(d, r, len);
+             break;
+        case SUBCMD_ENABLE_RUMBLE:
+            process_reply_enable_rumble(d, r, len);
+            break;
+         default:
+             loge("Switch: Error, unexpected subcmd_id=0x%02x in report 0x21\n", r->subcmd_id);
+             break;
+@@ -823,19 +847,26 @@ static void parse_imu(uni_hid_device_t* d, const struct switch_imu_data_s* r) {
     switch_instance_t* ins = get_switch_instance(d);
     uni_controller_t* ctl = &d->controller;
 
@ -308,7 +398,7 @@ index 599fc35..c72f056 100644
     if (ins->controller_type == SWITCH_CONTROLLER_TYPE_JCR) {
         accel[1] = -accel[1];
         accel[2] = -accel[2];
-@@ -843,10 +851,13 @@ static void parse_imu(uni_hid_device_t* d, const struct switch_imu_data_s* r) {
+@@ -843,10 +874,13 @@ static void parse_imu(uni_hid_device_t* d, const struct switch_imu_data_s* r) {
         gyro[2] = -gyro[2];
     }
 
@ -326,6 +416,121 @@ index 599fc35..c72f056 100644
 }
 
 // Process 0x30 input report: SWITCH_INPUT_IMU_DATA
+@@ -1172,6 +1206,18 @@ static void fsm_enable_imu(struct uni_hid_device_s* d) {
+     req->data[0] = (ins->mode == SWITCH_MODE_IMU);
+     send_subcmd(d, req, sizeof(out));
+ }
+static void fsm_enable_rumble(struct uni_hid_device_s* d) {
+    switch_instance_t* ins = get_switch_instance(d);
+    ins->state = STATE_ENABLE_RUMBLE;
+
+    uint8_t out[sizeof(struct switch_subcmd_request) + 1] = {0};
+    struct switch_subcmd_request* req = (struct switch_subcmd_request*)&out[0];
+    req->report_id = OUTPUT_RUMBLE_AND_SUBCMD;
+    req->subcmd_id = SUBCMD_ENABLE_RUMBLE;
+    req->data[0] = 0x01;
+    send_subcmd(d, req, sizeof(out));
+}
+
+ 
+ static void fsm_update_led(struct uni_hid_device_s* d) {
+     switch_instance_t* ins = get_switch_instance(d);
+@@ -1203,6 +1249,10 @@ static struct switch_rumble_freq_data find_rumble_freq(uint16_t freq) {
+     return rumble_freqs[i];
+ }
+ 
+static uint16_t switch_magnitude_to_amp(uint8_t magnitude) {
+    return (uint16_t)(((uint32_t)magnitude * 1003 + 127) / 255);
+}
+
+ static struct switch_rumble_amp_data find_rumble_amp(uint16_t amp) {
+     unsigned int i = 0;
+     if (amp > rumble_amps[0].amp) {
+@@ -1259,6 +1309,7 @@ void uni_hid_parser_switch_play_dual_rumble(struct uni_hid_device_s* d,
+             break;
+         case SWITCH_STATE_RUMBLE_IN_PROGRESS:
+             btstack_run_loop_remove_timer(&ins->rumble_timer_duration);
+            btstack_run_loop_remove_timer(&ins->rumble_timer_refresh);
+             break;
+         default:
+             // Do nothing
+@@ -1366,6 +1417,7 @@ static void switch_stop_rumble_now(uni_hid_device_t* d) {
+ 
+     // No need to protect it with a mutex since it runs in the same main thread
+     assert(ins->rumble_state == SWITCH_STATE_RUMBLE_IN_PROGRESS);
+    btstack_run_loop_remove_timer(&ins->rumble_timer_refresh);
+     ins->rumble_state = SWITCH_STATE_RUMBLE_DISABLED;
+ 
+     struct switch_subcmd_request req = {0};
+@@ -1379,6 +1431,22 @@ static void switch_stop_rumble_now(uni_hid_device_t* d) {
+     send_subcmd(d, (struct switch_subcmd_request*)&req, sizeof(req) - 1);
+ }
+ 
+static void switch_send_dual_rumble_now(uni_hid_device_t* d,
+                                        uint8_t weak_magnitude,
+                                        uint8_t strong_magnitude) {
+    struct switch_subcmd_request req = {
+        .report_id = OUTPUT_RUMBLE_ONLY,
+    };
+    // Fixed frequencies match the standard Switch LRA envelope and the
+    // 8BitDo Switch-mode implementation. Magnitudes control amplitude only.
+    switch_encode_rumble(req.rumble_left, 453, 135,
+                         switch_magnitude_to_amp(weak_magnitude));
+    switch_encode_rumble(req.rumble_right, 453, 99,
+                         switch_magnitude_to_amp(strong_magnitude));
+    // Rumble request don't include the last byte of "switch_subcmd_request": subcmd_id
+    send_subcmd(d, &req, sizeof(req) - 1);
+}
+
+ static void switch_play_dual_rumble_now(uni_hid_device_t* d,
+                                         uint16_t duration_ms,
+                                         uint8_t weak_magnitude,
+@@ -1391,14 +1459,17 @@ static void switch_play_dual_rumble_now(uni_hid_device_t* d,
+         return;
+     }
+ 
+-    struct switch_subcmd_request req = {
+-        .report_id = OUTPUT_RUMBLE_ONLY,
+-    };
+-    switch_encode_rumble(req.rumble_left, weak_magnitude << 2, weak_magnitude, 500);
+-    switch_encode_rumble(req.rumble_right, strong_magnitude << 2, strong_magnitude, 500);
+    ins->rumble_weak_magnitude = weak_magnitude;
+    ins->rumble_strong_magnitude = strong_magnitude;
+    switch_send_dual_rumble_now(d, weak_magnitude, strong_magnitude);
+ 
+-    // Rumble request don't include the last byte of "switch_subcmd_request": subcmd_id
+-    send_subcmd(d, &req, sizeof(req) - 1);
+    // Refresh active rumble for Switch-compatible controllers that do not
+    // retain a single output packet, including 8BitDo Switch mode.
+    ins->rumble_timer_refresh.process = &on_switch_refresh_rumble;
+    ins->rumble_timer_refresh.context = d;
+    btstack_run_loop_set_timer(&ins->rumble_timer_refresh,
+                               SWITCH_RUMBLE_REFRESH_MS);
+    btstack_run_loop_add_timer(&ins->rumble_timer_refresh);
+ 
+     // Set timer to turn off rumble
+     ins->rumble_timer_duration.process = &on_switch_set_rumble_off;
+@@ -1414,6 +1485,20 @@ static void on_switch_set_rumble_on(btstack_timer_source_t* ts) {
+ 
+     switch_play_dual_rumble_now(d, ins->rumble_duration_ms, ins->rumble_weak_magnitude, ins->rumble_strong_magnitude);
+ }
+static void on_switch_refresh_rumble(btstack_timer_source_t* ts) {
+    uni_hid_device_t* d = btstack_run_loop_get_timer_context(ts);
+    switch_instance_t* ins = get_switch_instance(d);
+    if (ins->rumble_state != SWITCH_STATE_RUMBLE_IN_PROGRESS) {
+        return;
+    }
+    switch_send_dual_rumble_now(
+        d, (uint8_t)ins->rumble_weak_magnitude,
+        (uint8_t)ins->rumble_strong_magnitude);
+    btstack_run_loop_set_timer(&ins->rumble_timer_refresh,
+                               SWITCH_RUMBLE_REFRESH_MS);
+    btstack_run_loop_add_timer(&ins->rumble_timer_refresh);
+}
+
+ 
+ static void on_switch_set_rumble_off(btstack_timer_source_t* ts) {
+     uni_hid_device_t* d = btstack_run_loop_get_timer_context(ts);
 diff --git a/src/components/bluepad32/parser/uni_hid_parser_wii.c b/src/components/bluepad32/parser/uni_hid_parser_wii.c
 index be2103e..4819639 100644
 --- a/src/components/bluepad32/parser/uni_hid_parser_wii.c
--- a/tests/bluepad32_backend_lifecycle_test.cpp
+++ b/tests/bluepad32_backend_lifecycle_test.cpp
@ -889,8 +889,10 @@ void test_abxy_hotkey() {
    require(slot_zero.rumble_calls == 1 &&
                slot_zero.last_high == kAbxyFeedbackWeakMagnitude &&
                slot_zero.last_low == kAbxyFeedbackStrongMagnitude &&
+                slot_zero.last_high == UINT8_MAX &&
+                slot_zero.last_low == UINT8_MAX &&
                g_slots[0].rumble_pending,
-            "ABXY confirmation did not take priority over host rumble");
+            "ABXY confirmation was not full-strength or did not take priority");

    platform_on_controller_data(&slot_zero, &input);
    process_rumble_timer(&g_rumble_timer);
--- a/tools/Test-AdapterFeasibility.ps1
+++ b/tools/Test-AdapterFeasibility.ps1
@ -0,0 +1,358 @@
+[CmdletBinding()]
+param(
+    [ValidateRange(5, 120)]
+    [int]$DetectionTimeoutSeconds = 30,
+
+    [ValidateRange(1, 4)]
+    [int]$ExpectedActiveControllers = 1,
+
+    [ValidateRange(2, 30)]
+    [int]$InputTestSeconds = 6,
+
+    [ValidateRange(100, 5000)]
+    [int]$RumbleMilliseconds = 600,
+
+    [switch]$SkipInteractive,
+
+    [string]$OutputPath = (Join-Path ([System.IO.Path]::GetTempPath()) "switch-pico-adapter-feasibility-results.json")
+)
+
+Set-StrictMode -Version Latest
+$ErrorActionPreference = "Stop"
+
+if ($PSVersionTable.PSEdition -eq "Core" -and -not $IsWindows) {
+    throw "This test must run on Windows."
+}
+
+Add-Type -TypeDefinition @"
+using System;
+using System.Runtime.InteropServices;
+
+public static class SwitchPicoXInput {
+    [StructLayout(LayoutKind.Sequential)]
+    public struct Gamepad {
+        public ushort Buttons;
+        public byte LeftTrigger;
+        public byte RightTrigger;
+        public short LeftThumbX;
+        public short LeftThumbY;
+        public short RightThumbX;
+        public short RightThumbY;
+    }
+
+    [StructLayout(LayoutKind.Sequential)]
+    public struct State {
+        public uint PacketNumber;
+        public Gamepad Gamepad;
+    }
+
+    [StructLayout(LayoutKind.Sequential)]
+    public struct Vibration {
+        public ushort LeftMotorSpeed;
+        public ushort RightMotorSpeed;
+    }
+
+    [DllImport("xinput1_4.dll", EntryPoint = "XInputGetState")]
+    public static extern uint GetState(uint userIndex, out State state);
+
+    [DllImport("xinput1_4.dll", EntryPoint = "XInputSetState")]
+    public static extern uint SetState(uint userIndex, ref Vibration vibration);
+}
+"@
+
+$script:Results = [System.Collections.Generic.List[object]]::new()
+
+function Add-Result {
+    param(
+        [string]$Name,
+        [bool]$Passed,
+        [string]$Detail,
+        [bool]$Required = $true
+    )
+
+    $script:Results.Add([pscustomobject]@{
+        Name = $Name
+        Passed = $Passed
+        Required = $Required
+        Detail = $Detail
+    })
+
+    $color = if ($Passed) { "Green" } elseif ($Required) { "Red" } else { "Yellow" }
+    $label = if ($Passed) { "PASS" } elseif ($Required) { "FAIL" } else { "SKIP" }
+    Write-Host ("[{0}] {1}: {2}" -f $label, $Name, $Detail) -ForegroundColor $color
+}
+
+function Get-UsbIdentityDevices {
+    param(
+        [Parameter(Mandatory = $true)]
+        [string]$Vid,
+        [Parameter(Mandatory = $true)]
+        [string]$Pid
+    )
+
+    $pattern = "VID_{0}&PID_{1}" -f $Vid.ToUpperInvariant(), $Pid.ToUpperInvariant()
+    if (Get-Command Get-PnpDevice -ErrorAction SilentlyContinue) {
+        return @(Get-PnpDevice -PresentOnly -ErrorAction SilentlyContinue |
+            Where-Object { $_.InstanceId -like "*$pattern*" })
+    }
+
+    return @(Get-CimInstance Win32_PnPEntity -ErrorAction SilentlyContinue |
+        Where-Object { $_.PNPDeviceID -like "*$pattern*" })
+}
+
+function Get-XInputState {
+    param([ValidateRange(0, 3)][int]$Index)
+
+    $state = [SwitchPicoXInput+State]::new()
+    $status = [SwitchPicoXInput]::GetState([uint32]$Index, [ref]$state)
+    return [pscustomobject]@{
+        Index = $Index
+        Connected = ($status -eq 0)
+        Status = $status
+        PacketNumber = $state.PacketNumber
+        Buttons = $state.Gamepad.Buttons
+        LeftTrigger = $state.Gamepad.LeftTrigger
+        RightTrigger = $state.Gamepad.RightTrigger
+        LeftThumbX = $state.Gamepad.LeftThumbX
+        LeftThumbY = $state.Gamepad.LeftThumbY
+        RightThumbX = $state.Gamepad.RightThumbX
+        RightThumbY = $state.Gamepad.RightThumbY
+    }
+}
+
+function Get-ConnectedXInputStates {
+    return @(0..3 | ForEach-Object { Get-XInputState -Index $_ } |
+        Where-Object { $_.Connected })
+}
+
+function Test-StateChanged {
+    param($Before, $After)
+
+    return $Before.PacketNumber -ne $After.PacketNumber -or
+        $Before.Buttons -ne $After.Buttons -or
+        $Before.LeftTrigger -ne $After.LeftTrigger -or
+        $Before.RightTrigger -ne $After.RightTrigger -or
+        $Before.LeftThumbX -ne $After.LeftThumbX -or
+        $Before.LeftThumbY -ne $After.LeftThumbY -or
+        $Before.RightThumbX -ne $After.RightThumbX -or
+        $Before.RightThumbY -ne $After.RightThumbY
+}
+
+function Set-XInputRumble {
+    param(
+        [ValidateRange(0, 3)][int]$Index,
+        [ValidateRange(0, 65535)][int]$Left,
+        [ValidateRange(0, 65535)][int]$Right
+    )
+
+    $vibration = [SwitchPicoXInput+Vibration]::new()
+    $vibration.LeftMotorSpeed = [uint16]$Left
+    $vibration.RightMotorSpeed = [uint16]$Right
+    return [SwitchPicoXInput]::SetState([uint32]$Index, [ref]$vibration)
+}
+
+function Read-YesNo {
+    param([string]$Prompt)
+
+    while ($true) {
+        $answer = (Read-Host "$Prompt [y/n]").Trim().ToLowerInvariant()
+        if ($answer -eq "y" -or $answer -eq "yes") { return $true }
+        if ($answer -eq "n" -or $answer -eq "no") { return $false }
+    }
+}
+
+Write-Host "Switch Pico Windows XInput feasibility test" -ForegroundColor Cyan
+Write-Host "Prototype identities: Switch probe 057E:2009 -> XInput CAFE:4010"
+Write-Host "Disconnect other XInput controllers before continuing."
+
+$baseline = Get-ConnectedXInputStates
+Add-Result -Name "Clean XInput baseline" -Passed ($baseline.Count -eq 0) `
+    -Detail ("{0} XInput controller(s) connected before the Pico" -f $baseline.Count)
+
+if (-not $SkipInteractive) {
+    Write-Host ""
+    Write-Host "Disconnect the Pico from USB." -ForegroundColor Yellow
+    [void](Read-Host "Press Enter after it is disconnected")
+
+    $disconnectDeadline = (Get-Date).AddSeconds(10)
+    do {
+        $switchPresent = (Get-UsbIdentityDevices -Vid "057E" -Pid "2009").Count -gt 0
+        $xinputPresent = (Get-UsbIdentityDevices -Vid "CAFE" -Pid "4010").Count -gt 0
+        if (-not $switchPresent -and -not $xinputPresent) { break }
+        Start-Sleep -Milliseconds 100
+    } while ((Get-Date) -lt $disconnectDeadline)
+
+    Add-Result -Name "Pico disconnected" `
+        -Passed (-not $switchPresent -and -not $xinputPresent) `
+        -Detail "Neither prototype USB identity is present"
+
+    Write-Host "Connect the Pico to this Windows PC now." -ForegroundColor Yellow
+} else {
+    Write-Host "Non-interactive mode: inspecting the currently connected Pico." -ForegroundColor Yellow
+}
+
+$transitionStart = Get-Date
+$deadline = $transitionStart.AddSeconds($DetectionTimeoutSeconds)
+$seenSwitch = $false
+$seenXInput = $false
+$switchSeenAt = $null
+$xinputSeenAt = $null
+
+while ((Get-Date) -lt $deadline) {
+    if (-not $seenSwitch -and (Get-UsbIdentityDevices -Vid "057E" -Pid "2009").Count -gt 0) {
+        $seenSwitch = $true
+        $switchSeenAt = (Get-Date)
+        Write-Host "Observed Switch probe identity 057E:2009" -ForegroundColor DarkCyan
+    }
+
+    if ((Get-UsbIdentityDevices -Vid "CAFE" -Pid "4010").Count -gt 0) {
+        $seenXInput = $true
+        $xinputSeenAt = (Get-Date)
+        Write-Host "Observed XInput identity CAFE:4010" -ForegroundColor DarkCyan
+        break
+    }
+    Start-Sleep -Milliseconds 50
+}
+
+if ($SkipInteractive -and $seenXInput) {
+    Add-Result -Name "Automatic identity transition" -Passed $true -Required $false `
+        -Detail "XInput identity is present; initial Switch probe was not observed in this run"
+} else {
+    $transitionPassed = $seenSwitch -and $seenXInput -and $xinputSeenAt -gt $switchSeenAt
+    $transitionMs = if ($transitionPassed) {
+        [math]::Round(($xinputSeenAt - $switchSeenAt).TotalMilliseconds)
+    } else { -1 }
+    Add-Result -Name "Automatic identity transition" -Passed $transitionPassed `
+        -Detail ("SwitchSeen={0}, XInputSeen={1}, transition={2} ms" -f $seenSwitch, $seenXInput, $transitionMs)
+}
+
+$xinputPnp = @(Get-UsbIdentityDevices -Vid "CAFE" -Pid "4010")
+Add-Result -Name "XInput PnP identity" -Passed ($xinputPnp.Count -gt 0) `
+    -Detail ("Found {0} present PnP node(s) for CAFE:4010" -f $xinputPnp.Count)
+
+$problemDevices = @($xinputPnp | Where-Object {
+    $_.PSObject.Properties.Name -contains "Status" -and $_.Status -notin @("OK", "Unknown")
+})
+Add-Result -Name "PnP device health" -Passed ($problemDevices.Count -eq 0) `
+    -Detail ("{0} unhealthy PnP node(s)" -f $problemDevices.Count)
+
+Start-Sleep -Seconds 2
+$connectedStates = Get-ConnectedXInputStates
+Add-Result -Name "Four XInput API slots" -Passed ($connectedStates.Count -eq 4) `
+    -Detail ("XInputGetState reports {0}/4 connected slots" -f $connectedStates.Count)
+
+$inputSummaries = @()
+if (-not $SkipInteractive) {
+    for ($index = 0; $index -lt $ExpectedActiveControllers; $index++) {
+        Write-Host ""
+        Write-Host ("For {0} seconds, exercise physical controller slot {1}:" -f $InputTestSeconds, ($index + 1)) -ForegroundColor Yellow
+        Write-Host "  D-pad, face buttons, both shoulders, both triggers, and both sticks."
+        [void](Read-Host "Press Enter to start capture")
+
+        $before = Get-XInputState -Index $index
+        $changed = $false
+        $samples = 0
+        $observedControls = [ordered]@{
+            DPad = $false
+            FaceButtons = $false
+            Shoulders = $false
+            LeftTrigger = $false
+            RightTrigger = $false
+            LeftStick = $false
+            RightStick = $false
+        }
+        $captureDeadline = (Get-Date).AddSeconds($InputTestSeconds)
+        while ((Get-Date) -lt $captureDeadline) {
+            $after = Get-XInputState -Index $index
+            if (Test-StateChanged -Before $before -After $after) {
+                $changed = $true
+            }
+            if (($after.Buttons -band 0x000F) -ne 0) { $observedControls.DPad = $true }
+            if (($after.Buttons -band 0xF000) -ne 0) { $observedControls.FaceButtons = $true }
+            if (($after.Buttons -band 0x0300) -ne 0) { $observedControls.Shoulders = $true }
+            if ($after.LeftTrigger -gt 0) { $observedControls.LeftTrigger = $true }
+            if ($after.RightTrigger -gt 0) { $observedControls.RightTrigger = $true }
+            if ([math]::Abs([int]$after.LeftThumbX) -gt 8000 -or
+                [math]::Abs([int]$after.LeftThumbY) -gt 8000) {
+                $observedControls.LeftStick = $true
+            }
+            if ([math]::Abs([int]$after.RightThumbX) -gt 8000 -or
+                [math]::Abs([int]$after.RightThumbY) -gt 8000) {
+                $observedControls.RightStick = $true
+            }
+            $before = $after
+            $samples++
+            Start-Sleep -Milliseconds 20
+        }
+        $missingControls = @($observedControls.GetEnumerator() |
+            Where-Object { -not $_.Value } |
+            ForEach-Object { $_.Key })
+        $inputPassed = $changed -and $missingControls.Count -eq 0
+        $inputSummaries += [pscustomobject]@{
+            Slot = $index
+            Changed = $changed
+            Samples = $samples
+            LastPacket = $before.PacketNumber
+            Observed = $observedControls
+            Missing = $missingControls
+        }
+        Add-Result -Name ("XInput slot {0} complete input" -f ($index + 1)) `
+            -Passed $inputPassed `
+            -Detail ("samples={0}, packet={1}, missing=[{2}]" -f $samples, $before.PacketNumber, ($missingControls -join ", "))
+    }
+
+    for ($index = 0; $index -lt $ExpectedActiveControllers; $index++) {
+        Write-Host ""
+        Write-Host ("Sending rumble to XInput slot {0} for {1} ms." -f ($index + 1), $RumbleMilliseconds) -ForegroundColor Yellow
+        $startStatus = Set-XInputRumble -Index $index -Left 65535 -Right 49152
+        Start-Sleep -Milliseconds $RumbleMilliseconds
+        $stopStatus = Set-XInputRumble -Index $index -Left 0 -Right 0
+        $observed = Read-YesNo -Prompt ("Did only physical controller slot {0} vibrate" -f ($index + 1))
+        Add-Result -Name ("XInput slot {0} rumble/isolation" -f ($index + 1)) `
+            -Passed ($startStatus -eq 0 -and $stopStatus -eq 0 -and $observed) `
+            -Detail ("XInputSetState start={0}, stop={1}, observed={2}" -f $startStatus, $stopStatus, $observed)
+    }
+} else {
+    Add-Result -Name "Interactive input and rumble" -Passed $true -Required $false `
+        -Detail "Skipped by -SkipInteractive"
+}
+
+$pnpDetails = @(Get-CimInstance Win32_PnPEntity -ErrorAction SilentlyContinue |
+    Where-Object { $_.PNPDeviceID -like "*VID_CAFE&PID_4010*" } |
+    Select-Object Name, PNPDeviceID, Service, ConfigManagerErrorCode)
+
+$report = [ordered]@{
+    TimestampUtc = [DateTime]::UtcNow.ToString("o")
+    ComputerName = $env:COMPUTERNAME
+    PowerShellVersion = $PSVersionTable.PSVersion.ToString()
+    Parameters = [ordered]@{
+        DetectionTimeoutSeconds = $DetectionTimeoutSeconds
+        ExpectedActiveControllers = $ExpectedActiveControllers
+        InputTestSeconds = $InputTestSeconds
+        RumbleMilliseconds = $RumbleMilliseconds
+        SkipInteractive = [bool]$SkipInteractive
+    }
+    Transition = [ordered]@{
+        SeenSwitch = $seenSwitch
+        SeenXInput = $seenXInput
+        SwitchSeenAt = if ($switchSeenAt) { $switchSeenAt.ToUniversalTime().ToString("o") } else { $null }
+        XInputSeenAt = if ($xinputSeenAt) { $xinputSeenAt.ToUniversalTime().ToString("o") } else { $null }
+    }
+    ConnectedXInputSlots = @($connectedStates | Select-Object Index, PacketNumber)
+    InputSummaries = $inputSummaries
+    PnpDevices = $pnpDetails
+    Results = @($script:Results)
+}
+
+$report | ConvertTo-Json -Depth 8 | Set-Content -LiteralPath $OutputPath -Encoding UTF8
+Write-Host ""
+Write-Host ("Wrote report: {0}" -f (Resolve-Path $OutputPath)) -ForegroundColor Cyan
+
+$failed = @($script:Results | Where-Object { $_.Required -and -not $_.Passed })
+if ($failed.Count -gt 0) {
+    Write-Host ("Feasibility test failed: {0} required check(s) failed." -f $failed.Count) -ForegroundColor Red
+    exit 1
+}
+
+Write-Host "All required feasibility checks passed." -ForegroundColor Green
+exit 0
Author	SHA1	Message	Date
Joey Yakimowich-Payne	a7fb6c5694	Add Windows XInput feasibility test	2026-09-02 09:08:49 -06:00
Joey Yakimowich-Payne	604450375d	Merge branch 'master' into feasibility/adapter-parity	2026-09-02 08:57:52 -06:00
Joey Yakimowich-Payne	8351cb1d15	Enable strong rumble for 8BitDo Switch mode	2026-09-02 08:50:26 -06:00