85 lines
4.4 KiB
C
85 lines
4.4 KiB
C
#pragma once
|
|
|
|
#include <stdbool.h>
|
|
#include <stdint.h>
|
|
|
|
#ifdef __cplusplus
|
|
extern "C" {
|
|
#endif
|
|
|
|
typedef struct {
|
|
bool active;
|
|
uint32_t serial;
|
|
uint8_t buttons[2];
|
|
uint8_t stick[3];
|
|
// Latest opaque native 07/08 byte 8.
|
|
uint8_t native_status;
|
|
// Cumulative signed relative totals within mouse_epoch, not per-poll
|
|
// deltas. Cached polls repeat these totals without consuming motion.
|
|
// Epoch changes on reconnect, including a teardown missed between polls.
|
|
uint32_t mouse_epoch;
|
|
int64_t mouse_total_x;
|
|
int64_t mouse_total_y;
|
|
// Latest opaque native 07/08 byte 13.
|
|
uint8_t mouse_surface;
|
|
} probe_controller_input;
|
|
|
|
// Core 0, before stdio/peripheral initialization.
|
|
void probe_controller_input_clock_init(void);
|
|
// Core 0, after stdio and before protocol reset or USB startup.
|
|
void probe_controller_input_init(void);
|
|
// True means flash coordination is ready, not that the radio is ready or a
|
|
// controller is connected. Hub mode initializes on Core 0 with Core 1 reserved
|
|
// for SRAM-only USB; other modes register both cores and launch the radio there.
|
|
// Failure is latched: keep USB and flash-writing protocol operations disabled.
|
|
bool probe_controller_input_start(void);
|
|
// Core 0 main loop before USB tasks, outside IRQs and application state locks.
|
|
// Hub mode cooperatively services CYW43/BTstack, including storage and haptics;
|
|
// a no-op before successful start and in dedicated-radio modes.
|
|
void probe_controller_input_task(void);
|
|
// Core 0 after start(): polls the existing two-second BOOTSEL hold gesture.
|
|
// True means a Bluetooth pairing-window request was queued. Long holds NEVER
|
|
// clear pairings in this bridge, and this does not inject USB controller input.
|
|
bool probe_controller_input_pairing_task(void);
|
|
#if SWITCH2_BRIDGE_WII_INPUT
|
|
// Main supplies the same validated calibration record advertised to the host.
|
|
void probe_controller_input_set_stick_calibration(const uint8_t calibration[9]);
|
|
// Native feature changes are output barriers, not Bluetooth/IMU resets.
|
|
void probe_controller_input_set_native_features(uint8_t features);
|
|
#endif
|
|
#if SWITCH2_BRIDGE_FULL_INPUT
|
|
// Supply each child's advertised, validated nine-byte stick record. Native
|
|
// output stays unavailable until that child's calibration has been supplied.
|
|
void probe_controller_input_set_full_stick_calibration(uint8_t instance, const uint8_t calibration[9]);
|
|
#endif
|
|
// Core0 native07/08 output. Disable discards queued/prepared data; repeated
|
|
// enable preserves it. Joy-Con mode relays its bounded FIFO; right-only Wii
|
|
// mode synthesizes fresh calibrated sensors and the selected IR pointer.
|
|
// Full-controller mode splits one supported gamepad into independent R/L output streams;
|
|
// controls remain live while motion is unavailable. Wii refines bias without blocking IMU.
|
|
// No pairing changes.
|
|
void probe_controller_input_set_native_stream(uint8_t instance, bool enabled);
|
|
// Copy one63-byte payload without report ID. Returns a boot-unique token, or0
|
|
// without changing output. Nondestructive until successful HID submission and
|
|
// commit. now_ms uses the Pico boot-ms clock; unavailable/stale input is rejected.
|
|
uint32_t probe_controller_input_peek_native_report(uint8_t instance, uint32_t now_ms, uint8_t report[63]);
|
|
// Remove only the exact current head once. A stale/replaced token cannot pop a
|
|
// new stream's packet. Before flash-ready startup peek/commit return 0/false.
|
|
bool probe_controller_input_commit_native_report(uint8_t instance, uint32_t serial);
|
|
// Built-in vibration samples only; raw HD-rumble output is not forwarded.
|
|
// A nonzero token means queued, not completed. Result:0 pending,1 completion,
|
|
// -1 failed/stale. Joy-Con completion is its application ACK; Wii/DualSense
|
|
// completion is actual bounded rumble-driver dispatch, not a source application
|
|
// ACK or an HD-waveform fidelity claim.
|
|
// Reset cancels the request, never stored pairing.
|
|
bool probe_controller_input_play_sample(uint8_t instance, uint8_t sample_id, uint64_t* token);
|
|
int probe_controller_input_sample_result(uint8_t instance, uint64_t token, uint32_t now_ms);
|
|
void probe_controller_input_cancel_sample(uint8_t instance);
|
|
// Core0 at250Hz; now_ms uses Pico boot milliseconds. Supplies current mapped
|
|
// controls for diagnostic reports; the native sender owns motion consumption.
|
|
// Inactive controls are zero except serial; USB supplies its calibrated center.
|
|
void probe_controller_input_poll(uint8_t instance, uint32_t now_ms, probe_controller_input* out);
|
|
|
|
#ifdef __cplusplus
|
|
}
|
|
#endif
|